 |
 |
|
|
|
|
 |
|
TECHNICAL
SPECIFICATIONS FOR HIGH PRESSURE BOOSTER COMPRESSOR
CTP-B 200 |
||
|
FUNCTION
AND WORKING METHOD OF A FAST FILLING STATION WITH INTEGRATED BOOSTER:
IN AUTOMATED COMPRESSOR OPERATION DURING IDLE PERIODS, I.E. DURING THE NIGHT, THE STORAGE SYSTEMS ARE FILLED. DURING DAY TIME, WHEN A LARGE NUMBER OF SMALL TANKS HAVE TO BE FILLING WITHIN A SHORT TIME, COMPRESSORS ARE SWITCHED OVER TO BOOSTER OPERATION. THIS IS EFFECTED BY SIMPLY OPERATING A HIGH PRESSURE VALVE. THE HIGH PRESSURE STAGE OF THE MULTISTAGE HIGH PRESSURE COMPRESSOR IS NOW DIRECTLY CONNECTED TO THE STORAGE SYSTEM AND THE PRE-COMPRESSED AIR FROM THE STORAGE SYSTEM FLOWS INTO THE SMALL TANKS. AS SOON AS THERE IS A PRESSURE BALANCE IN THE SYSTEM, THE HIGH PRESSURE VALVE SWITCHES OVER TO BOOSTER OPERATION AND THE LAST COMPRESSOR STAGE COMPRESSES UP TO REQUESTED FINAL PRESSURE. OPERATION OF THE SWITCH-OVER VALVE WILL BE CARRIED OUT BY ELECTRO-PNEUMATIC REMOTE CONTROL. |
||
| medium | breathing air ACC. DIN 3188 / EN 12021 | |
| intake pressure | bar abs. | 1 - 1.2 |
| rated overpressure | bar max. | 350 |
| delivered
quantity measured at filling standard from 0 to 200 bar depending of storage pressure |
l / min. | 200 - 1200 |
| m³ / h | 12,6 - 54 | |
| speed |
r.p.m. |
1300 |
| number of stages | 3 | |
| number of cylinders | 3 | |
| cylinder
1st stage cylinder 2nd stage cylinder 3rd stage |
ø mm | 88 |
| 36 | ||
| 14 | ||
| piston travel | mm | 40 |
| intermediate
overpressures 1st stage approx. 2nd stage approx. |
bar |
7 |
| 40 - 46 | ||
| filling pressure ( fin.safety valve) | bar | 225-330 |
| rotating direction | counterclockwise | |
| cooling | air | |
| lubrication | splash lubrication with oil whizzer pin | |
| quantity of lubricating oil | l | 1,8 |
| oil type | see chapter 2 , Lubrication | |
| tolerated maximum ambient temperature | °C | +5 to +45 |
| tolerated maximum inclination | 5° | |
| condensate drain | every 10-15 min., manually | |
| drive
motor three-phase squirrel cage motor (E3) HONDA-motor GX 270 (P) HATZ-diesel engine 1 B 30 (DHA) |
4,0 kW |
400/660 V, 50/60 Hz, 2900 r.p.m., design B3, type of protection IP 55 |
| 6,6 kW | manual starter | |
| 4,6 kW | manual starter | |
| special voltage on request | ||
| electrical
control operating voltage control voltage |
V/Hz | 400 V, 50/60 Hz |
| 230 V, 50/60 Hz | ||
| pressure
switch adjustment cut-out pressure, max./min. cut-in pressure, max./min. |
bar | 330/150 |
| 295/135 | ||
|
weight
netto |
kg | 165 |
| dimension
L x W x H CTP-B 200 E3 / P / DHA |
cm | 90 x 60 x 87 |